粘接蠟：AT29-71

JIUDING stick waxes is used primarily for bonding a wax pattern to a wax sprue system. Only they are melted and heated working temperature. The end of the pattern gate is dipped into the stick wax and place against the sprue and held for a moment while the stick wax cools and bonds. The efficiency is more high, sticky strength is more high, and its casting certified rate is more high than pattern wax instead of stick wax. The materials used are completely compatible with all pattern and sprue wax system they will drain completely from shells on either autoclaving or burnout.

九鼎粘接蠟是用來粘接蠟模和澆注系統的專用蠟，使用方法簡單，只需要把粘接蠟加熱到使用的溫度，然后用蠟模內交口蘸取粘接蠟直接粘在澆注系統上就可以，使用時也可以根據客戶的不同需要調整到自己需要的溫度，這是粘接蠟的優點。九鼎粘接蠟配方獨特，有良好的粘接力和粘接效率，使用粘接蠟比傳統的烙鐵焊接效率更高。因為專業，所以粘接處不產生縫隙，有利于鑄件合格率，粘接蠟是一種針對性開發的特種蠟，粘接力強，粘接更牢，涂料時不產生掉件。更環保，很大的改善工作環境。粘接蠟具有很好的兼容性，與模型蠟配合使用不會產生任何不良影響，在脫蠟時，完全培燒干凈，不會有殘留。