• <sub id="el7st"><output id="el7st"><source id="el7st"></source></output></sub>

      <sub id="el7st"></sub>

      <var id="el7st"></var>
    1. 歡迎訪問蘇州市毅杰蠟業有限公司網站!   
      熱門關鍵詞搜索:      拔毛蠟   |    中溫鑄造蠟   |   精密鑄造蠟

      聯系我們
       蘇州市毅杰蠟業有限公司

      地   址:蘇州市吳中區甪直鎮吳淞路18號

      聯系人:龔總

      電   話:0512-66309516
      傳   真:0512-66309526
      手   機:13451628308/18862688688
      郵   編:215127

      網   址www.kookeekids.com

      中溫鑄造蠟廠家-專注研究生產中溫蠟廠家


      詳細頁

      21

      產品名稱: 中溫鑄造蠟 AT868

      發布日期: 2016-09-18

      點擊數: 6000

      詢價: 點擊產品詢價

      二維碼:

      簡述:

      產品詳情

      溫鑄造蠟AT868

      JIUDING Casting Wax AT868 is formulated with a proven neutral no filler for liquid injection. The wax is light green in color. JIUDINGAT868 offers a wide liquid injection range with very little cavitation in the thick sections of the patterns.

      “九鼎”牌AT868是一種含有中性非填料的淡綠色模型蠟,具有壓蠟范圍廣,大型模蠟模沒有氣穴的高檔模型蠟。

      JIUDING AT868 reproduces excellent surface detail with good rigidity and dimensional stability and exhibits excellent flow characteristics. AT868 is suitable for an array of different parts ranging from small blades and vanes with or without fragile cores to large structural casting, aircraft castings, commercial hardware and thin walled parts.

      它具有優良的表面光潔度,適中的硬度,尺寸穩定和非常好的流動性。它應用廣泛,從小的含有陶瓷蕊的螺旋槳的葉片到一般性的超大鑄件以及薄殼鑄件都非常的適合。

      This no filled wax can be used for both ferrous and non-ferrous castings because of minimum residue on burnout.

      由于它是一種脫蠟后極低殘留的非填充蠟,適合于一般的鐵鑄和合金鑄造。

      SPECIFICATION(主要性能標準)

      Ring & Ball Softening Point(環球軟化點)

      155℉/68.3℃

      Penetration 450 GM Load(針入度)

      22DMM

      Specific Gravity(比重)

      0.941

      Ash Content(灰份)

      0.02% MAX

      Drop Melt Point(點熔點)

      75.8─81.7℃

      L.S(收縮率)

      0.8---1.0

       

      RECOMMENDED LIQUID INJECTION (液態/糊狀壓蠟參數)

      Maintain temperature(保溫溫度)

      80.0℃/63.5℃

      Temperature(射蠟溫度)

      65.5℃/58.2℃

      Nozzle Temperature(射嘴溫度)

      68℃/62℃

      Fragile Cored Parts(陶瓷蕊溫度)

      72℃/74


      常見問題及處理方法:

      收縮率大, 適當降低射蠟溫度

      表面麻點,蠟水分沒處理干凈,或管道含雜質

      表面桔皮,適當提高保溫和射蠟溫度

      取模粘接, 降低冷卻水溫度



      上一個:沒資料

      下一個:中溫鑄造蠟 AT996

      網站首頁    |   關于我們    |    產品展示   |   公司形象   |   資質證書    |   合作客戶    |   新聞中心   |   常見問題    |     在線留言  |   聯系我們

      技術支持:仕德偉   蘇ICP備15058372號版權所有 蘇州市毅杰蠟業有限公司  勿建立鏡像

       

      久久超碰国产老太精品最新|亚洲精品国偷自产在线|久久www免费人成精品妓女|欧美日韩精品一区二区在线视频|国产三级漂亮护士和医生

    2. <sub id="el7st"><output id="el7st"><source id="el7st"></source></output></sub>

        <sub id="el7st"></sub>

        <var id="el7st"></var>